MANUFACT.INS
Sign in

Assets & Resources · ManufactINS

Machines

Every asset with status, telemetry, health score and the maintenance behind it.

What changed in Machines recently

  1. Fixed · Release 2.52 · 20 November 2026

    With a client plant in scope beside the sample plants, the Digital Twin’s “Machines down” tile and its “Machines down now” list left out the client plant’s stopped machines, while the “Machines running” tile beside them counted them (18 down against 20). Both now read every plant’s machines; a client plant’s stopped machine is listed with its line, and no component is named for it, since it has no condition reading.

  2. New · Release 2.49 · 20 November 2026

    Digital Twin → “3D factory floor”, also a tab on Machines and Factory Layout: the plant’s hall in 3D, built from its saved Factory Layout or, without one, from its lines and machines. Each machine is drawn as its kind — CNC centres, welding cells, presses, furnaces and moulding lines, granulators and coating pans, tower cans on rotators — with its state on its andon light, its OEE, the job on it now from the finite-capacity schedule, and its last stops from the downtime register and its breakdown history. Material flows move on the floor from the stores through the lines to dispatch.

  3. New · Release 2.46 · 20 November 2026

    On a client plant, Machines, OEE, Quality, Planning and Decisions show its own data. Machines and lines are as loaded. A machine with an open stop or breakdown is down. Machines with log records show their measured OEE (availability × performance × quality over the log’s 30 days); a machine without records shows no state, never a number. NCRs are raised against its own products and materials.

  4. New · Release 2.31 · 19 November 2026

    Predictive Maintenance now fits each plant’s own failure curve: a machine’s 30-day failure risk and remaining life come from the plant’s breakdown history once it has 5 breakdowns and the fitted curve beats the default in a back-test; otherwise the default curve is used and the screen says why. Spare Parts sets a reorder point for each wear part from the failures expected over its lead time, and Machines shows the machine most likely to fail.

  5. Improved · Release 2.21 · 17 November 2026

    Machines the feed shows down are counted beside the downtime reports — how many have an open report and how many are flagged only by the feed — and the shift’s loss profile is each plant’s own, from its sequence and machine states.

  6. Fixed · Release 2.18 · 17 November 2026

    Recorded machine stops are costed on planned shift time: the labour and overhead a stop leaves unabsorbed, and the hours, units and value a repeated-stop maintenance decision says were lost, now count only the minutes inside the shifts (06:00–22:00 plant time, Saturday to Thursday) in the last 7 days. A stop from Thursday 20:00 read on Saturday at 02:00 costs its 2 shift hours, not its 30 clock hours. Availability already counted this way. The What-if studio’s Machines down now adds the same production cost at any hour.

Every release